Adding swap to an EBS-backed Ubuntu EC2 instance

Another one of those recipes I need to capture for future use. We were running a bunch of memory intensive processes on a medium (m2) Ubuntu instance on EC2 yesterday, and things were not going well. It looked like some processes were dying and being restarted. Poking around in the kernel messages we came across several events reading:

"Out of memory: Kill process ... blah blah"

Well, damn. There are less than 4GB of usable RAM on a medium, but it should be swapping, right? Wrong. We checked free and there was no swap file. That was my screw up, since I set up the instance and did not realize it had no swap. Turns out that what Amazon considers to be memory constrained instances (smalls and micros, for example) get some swap in the default config, but apparently mediums and larges do not. We decided to rebuild the instance as a large to get more RAM and also another processing unit, and add some swap at the same time.

I wasn’t able to figure out how to configure swap space in the instance details prior to launch, so I searched around and put together this recipe for adding it post-launch. This applies to Ubuntu EBS-backed instances. It should work generally for any debian-based distro, I think. If your instance is not EBS backed you can use many of the same techniques, but you’ll have to figure out the deltas because we don’t use any non-EBS instances. Anyway, to the details.

EBS-backed instances have their root volume on EBS, which is what EBS-backed means. But you don’t want to put swap space on EBS. EBS use incurs I/O charges, and although they are very low, they aren’t nothing. If you were to locate swap on EBS then there would at least be some chance of some process going rogue and causing a lot of swapping and associated costs. Not good.

Fortunately, EBS-backed instances still get so-called “ephemeral” or “instance storage” at launch. Unlike EBS this storage is physically attached to the system, and also unlike EBS it goes away when the instance is stopped (but not when it is rebooted). That’s why it is called “ephemeral.” Something else that is ephemeral is the data stored in a swap file, so it seems like instance storage and swap files are made for each other. Good news: every EBS-backed instance on EC2 still gets ephemeral storage by default. It consists of either a 32GB SSD, or two 320GB magnetic disks, depending on your choices. For instances that do not get swap allocated by default, this storage is mounted at /mnt after startup (either the SSD, or the first of the magnetic disks; if you want the second disk you need to mount it manually).

So before you start make sure your config matches what I’ve described above, i.e. you have an EBS-backed instance with ephemeral storage mounted at /mnt (which you can confirm with the lsblk command), and no swap space allocated (which you can confirm with the swapon -s command).

First thing to do is create a swapfile in /mnt. The one thing I am not going to do is opine on what size it should be, because there is a lot of info out there on the topic. In this example I made the swap 2GB.

# sudo dd if=/dev/zero of=/mnt/swapfile bs=1M count=2048

This command just writes two gigs worth of 0’s to the file ‘swapfile’ on /mnt. Next make sure the permissions on this new file are set appropriately.

# sudo chown root:root /mnt/swapfile
# sudo chmod 600 /mnt/swapfile

Next use mkswap to turn the file full of 0’s into an actual linux swapfile.

# sudo mkswap /mnt/swapfile
# sudo swapon /mnt/swapfile

The first command formats the file as swap space (I actually have no idea what it does at a low level, so ‘format’ might be a wildly incorrect term to use), and the second sets it up as the system swap file. Now you should update fstab so that this swap space gets mounted and used when the system is rebooted. Use your preferred editor and add the following line to /etc/fstab:

/mnt/swapfile swap swap defaults 0 0

Lastly, turn on swapping.

# swapon -a

You can now use swapon -s to confirm that the swap space is in use, and the free or top commands to confirm the amount of swap space. One thing to note is that this swap space will not survive an instance stop/start. When the instance stops the ephemeral storage will be destroyed. On restart the changes made in fstab and elsewhere will still be there, because the system root is on EBS, but the actual file we created at /mnt/swapfile will be gone, and will need to be recreated.

 

4 thoughts on “Adding swap to an EBS-backed Ubuntu EC2 instance

  1. Hello,

    Thank you for this! :)
    I tried your tutorial with success, the swapfile was created and is operational.

    # swapon -s
    Filename Type Size Used Priority
    /mnt/swapfile file 5242876 0 -1

    But when needed, the swap space is never used. :/

    Do you know if I need to do anything else? I followed all of your instructions, and indeed the swap space is there but really never used :( please help.

    # free -m
    total used free shared buffers cached
    Mem: 7513 5463 2050 1 72 4642
    -/+ buffers/cache: 747 6765
    Swap: 5119 0 5119

  2. Hi, Raquel. Are you very sure that the swapfile is needed? How to create and enable one is fairly simple, but the algorithms that the operating system uses for memory management are much more complex. How do you know that the swapfile should be in use? Are you exhausting memory?

Leave a Reply

Your email address will not be published. Required fields are marked *